eCommerce WordPress Themes
Return to previous page
Grid
List
Show
Autel MaxiIM IM608 PRO II Advanced Key Programming Tool Full Adapter Bundle + Free OTOFIX Programmable Smart Key Watch

Autel MaxiIM IM608 PRO II Advanced Key Programming Tool Full Adapter Bundle + Free OTOFIX Programmable Smart Key Watch

₨ 885,000.00

  • Advanced IMMO & Key Programming Tool with OE-level diagnostics

  • Includes XP400 Pro Key Programmer & MaxiFlash JVCI+ ECU Programmer

  • Supports Read PIN/CS (All Keys Lost), Key Generation & Remote Learning

  • Advanced ECU Coding & Bi-Directional Control functions

  • 40+ Maintenance Services including EPB, DPF, SAS, Oil Reset, BMS & ABS Bleeding

  • Covers 10,000+ US, Asian & European vehicles (12V cars, SUVs, light trucks)

  • Powered by Android 10 OS, Octa-core processor & 10.1” HD touchscreen

Autel MaxiIM KM100 is an advanced key and immobilizer Universal key Programmer

Autel MaxiIM KM100 is an advanced key and immobilizer Universal key Programmer

₨ 121,498.70
MaxiIM KM100 is an advanced key and immobilizer touchscreen tablet capable of smart key creation and IMMO learning via OBD. This 5.5-inch, Android touchscreen tablet with Bluetooth VCI can program the Autel IKEY as a smart key replacement for more than 700 vehicles and offers IMMO programming capability for multiple vehicle brands including BMW, Volkswagen, Toyota, Honda, and General Motors. Additional innovative features include key renewal and Transponder Editing of 20 supported protocols.
BitEdit BitBox Dongle with software for editing automotive ECU calibrations

BitEdit BitBox Dongle with software for editing automotive ECU calibrations

₨ 35,400.00
BitEdit is a modern software for editing automotive ECU, calibrations. It allows to change most dynamic options of, the engine. The software works in the following way: you, open an ECU flash file, it gets identified and you are, shown a list of calibrations, that can be edited. After the, changes are completed you can save a new file ready for, writing. BitEdit editor is good for professionals and, newbie tuners.

Out of stock

CarProTool Programmer Car meter reverse and air bag reset tool

CarProTool Programmer Car meter reverse and air bag reset tool

₨ 50,150.00
CarProTool Programmer + EEPROM Programmer activation. Package includes : CPT Programmer Power Adapter RJ48 Cable Activation EEPROM Programmer Possible programming without desoldering chip from main board Supported Chips...
CG FC200 ECU Programmer – Professional ECU/EGS Read, Write & Clone Tool

CG FC200 ECU Programmer – Professional ECU/EGS Read, Write & Clone Tool

₨ 213,875.00

  • Professional ECU & EGS programming and cloning tool

  • Supports ECU read/write via OBD, Bench, and Boot modes

  • Covers a wide range of petrol and diesel ECUs (Bosch, Continental, Siemens, etc.)

  • Supports ISN reading, VIN modification, and ECU cloning on supported vehicles

  • Smart identification and checksum calculation for safer programming

  • Designed for professional workshops and advanced automotive technicians

CG100 ADVANCE FULL KIT Auto Computer Programmer Airbag Restore Devices Renesas SRS FULL FEATURE

CG100 ADVANCE FULL KIT Auto Computer Programmer Airbag Restore Devices Renesas SRS FULL FEATURE

₨ 160,185.00
The software adopt to operate interface with wizard-style, data arbitrarily rewrite, MCU pin identification and detection, full support for CPU airbag computer repair. Supported operating systems software: XP/WIN7/WIN8/32bit/64bit.

Out of stock

CPT Can Adapter Programming Tool

CPT Can Adapter Programming Tool

₨ 51,625.00
CPT CAN ADAPTER - simple way for dump reading by CAN.
Digiprog 3 IC Clip Large for Digiprog 3 device High Quality ST04 04/2 Clip Cable

Digiprog 3 IC Clip Large for Digiprog 3 device High Quality ST04 04/2 Clip Cable

₨ 3,613.75
Digiprog 3 IC Clip Large for Digiprog 3 device High Quality ST04 04/2 Clip Cable,
High Quality Digiprog3 ST04 04/2 Clip Cable, Digiprog 3 st04 interface.
Digiprog 3 odometer programmer meter reverse correction tool

Digiprog 3 odometer programmer meter reverse correction tool

₨ 48,675.00
Why Choose Our Digiprog III? 1. Newest Version: V4.94 2. Supported Languages: Deutsch, English, Espanol, French, Portuguese, Italiano, Turkish, Nederlands. 3. Worldwide leader in digital...
IC PROGRAMING CLIP WITHOUT WIRE Test Clip SOIC8

IC PROGRAMING CLIP WITHOUT WIRE Test Clip SOIC8

₨ 1,548.75
CPT-063 Test Clip SOIC8 IC PROGRAMING CLIP WITHOUT WIRE 
IC programming Clip with wire Flash Chip IC Test Clip Adapter Scoket BIOS/24/25/93 Programmer

IC programming Clip with wire Flash Chip IC Test Clip Adapter Scoket BIOS/24/25/93 Programmer

₨ 2,507.50
IC programming Clip with wire Flash Chip IC Test Clip Adapter Scoket BIOS/24/25/93 Programmer
IPROG PRO Original Russian Multi Dashboard Programmer

IPROG PRO Original Russian Multi Dashboard Programmer

₨ 339,840.00

IPROG PRO Original Russian Multi Dashboard Programmer. Functions: KEY PROGRAMMING FOR TRUCK , MOTO , CARS Odometer Adjustment PROGRAMMING MCU read/write EEPROM Clear Crash AIRBAG IMMO

IProg+ Programmer Support IMMO + Mileage Correction + Airbag Reset, Replace Carprog Digiprog III

IProg+ Programmer Support IMMO + Mileage Correction + Airbag Reset, Replace Carprog Digiprog III

₨ 27,140.00
Functions including airbag, dashboard, car radio, ecu, eeprom, IMMO, mcu. and more special functions like dpf off, MIL to KM, PINABS, PINCODE SMATRA3,PINCODE SENSOR SPEED LIMIT,ODO Adjust, Fujutsu, Microchip, Motorola, Motorola912EN, NECV850, BLR, CAN,CRC_Cript, ibutton, sd_unlocker,test etc.
KESS V2 ECU Programmer OBD2 ECU Tuning & Flashing Tool with K-Suite Software

KESS V2 ECU Programmer OBD2 ECU Tuning & Flashing Tool with K-Suite Software

₨ 22,998.20

KESS V2 ECU Programmer

Professional Automotive ECU Programmer & Tuning Tool
The KESS V2 ECU Programmer is a powerful and versatile vehicle tuning and flashing tool designed for automotive technicians, tuners, and workshop professionals. Using the included K-Suite software, the KESS V2 allows users to read, write, and modify ECU firmware data directly through the vehicle’s OBD2 port, eliminating the need to remove the ECU from the car, bike, or truck.

Wide Compatibility & Multi-Protocol Support
Built to support a wide range of vehicles, the KESS V2 interfaces with major communication protocols such as CAN, K-Line, J1850, and more, ensuring broad coverage across different makes and models. Whether you’re tuning petrol or diesel vehicles, motorcycles, tractors, or commercial units, the KESS V2 provides reliable ECU access for performance enhancements and diagnostics.

Advanced Safety & Smart Features
Safety and precision are key with this tool. The KESS V2 monitors real-time battery voltage, employs automatic checksum correction, and includes a full recovery mode to protect against errors during read/write operations. These safeguards help maintain ECU integrity while performing modifications or remapping tasks.

Enhanced Diagnostic Capabilities
In addition to tuning functions, the KESS V2 includes basic diagnostic features such as reading and clearing Diagnostic Trouble Codes (DTCs), making it a useful all-in-one solution for both ECU programming and basic maintenance.

User-Friendly & Laptop Compatible
Setup is simple: connect the device to your vehicle’s OBD2 port, link it to a Windows laptop via USB, and run the intuitive K-Suite software. Supported systems typically include Windows XP through Windows 10 (32-bit and 64-bit), providing flexible compatibility with workshop computers.

Whether you’re performing performance remapping, restoring factory settings, or clearing ECU faults, the KESS V2 ECU Programmer is a dependable tool that combines professional-grade tuning capabilities with everyday usability.

What’s in the Box — KESS V2 ECU Programmer

  1. 1 × KESS V2 Main Unit
  2. 1 × OBD2 Multi‑Color Cable
  3. 1 × USB Cable
  4. 1 × Power Adapter
  5. 7 × Protocol/Adapter Cables (144300T series)
  6. 1 × CD with Software & Drivers
KT200 ECU Programmer Chip Tuning Tool Kit KT200 ECU/TCU Programmer Support OBD/BOOT/JTAG/BDM Multiple Protocols

KT200 ECU Programmer Chip Tuning Tool Kit KT200 ECU/TCU Programmer Support OBD/BOOT/JTAG/BDM Multiple Protocols

₨ 295,000.00
KT200 ECU Programmer Chip Tuning Tool Kit KT200 ECU/TCU Programmer Support OBD/BOOT/JTAG/BDM Multiple Protocols V2022.10.01 Multi-language: Italian, English, Dutch, French, Spanish, Polish, Portuguese, Czech, Romanian, Turkish.
KTAG Clone Master version 2.25 Firmware 7.020

KTAG Clone Master version 2.25 Firmware 7.020

₨ 22,998.20
KTM100 KTAG ECU Programming Tool Master software V2.25 with Unlimited Token, Available Protocols: BDM MOTOROLA MPC5xx, Easy to use, automatically recognize ECU model, high stability.
Home
Shop
183 Cart
More
More